About Freshbloo

Hardness is the result of an excess concentration of calcium and / or magnesium salts.

What is Hard Water

Hardness is the result of an excess concentration of calcium and / or magnesium salts. In industries this results in scales formation (Calcification) inside pipes, poor water quality, algae, etc. This severely affects the efficiency of industrial operating systems, resulting in loss of pressure, tremendous heat loss, more maintenance, excessive use of chemicals, increased running costs, etc

How to Treat Hard Water?

Freshblue fluid conditioners are the ultimate solution in the treatment of hard water. Freshblue conditions hard water into soft water instantly, without the use of chemicals. It removes existing scales and prevents fresh scales formation as well as algae formation.

How Does Freshblue Work?

Freshblue uses state of theart ferro-ceramic magnets to condition the minerals in the water by changing their physical structure, thereby 'deactivating' the hardness.

Freshblue does not remove or add any minerals. Freshblue does not use chemistry, it works with principles of physics. Even though the calcium is not removed from the water, it is harmless due to its altered physical state.

The conditioned minerals become 'Centre of attraction, which attract existing scales. The existing scales become loose and follow the conditioned minerals and are flushed out.

Algae feed on minerals in the water. When Freshblue changes the physical structure of the minerals, the algae are not able to recognize the minerals, hence they cannot feed and they die.

Product - FRESHBLOO


Freshbloo IN INDUSTRIES

  • Conditions Hard Water into Soft Water instantly.
  • Removes existing scales formation & corrosion.
  • No softeners necessary.
  • No descaling chemicals necessary.
  • No heat loss due to scaling.
  • Drastically reduces maintenance & replacement costs.
  • Minimizes down time.
  • Is totally environment friendly as there are no chemicals or toxins to dispose of.
  • No descaling chemicals necessary.
  • No heat loss due to scaling.

How is it Work?


In Water systems such as cooling towers, boilers and heat exchangers calcium carbonate and other dissolved salts form scale deposits. The traditional approach to descaling and scale prevention has been the continuous use of costly chemicals, or acid treatment and the manual removal of scale deposits. In-line installations of MFC systems offer a cost effective, safe and environmentally sound alternative. Non-chemical MFC water treatment and de-scaling systems change and inhibit the formation of calcite, promoting the formation of another forma of calcium carbonate crystals (aragonite). This material is not sticky, much smaller and easily removed during blow down.

In Storage Tanks & Pipelines the application of MFC technology enhances oil water separation, eliminates the need for costly toxic biocides and reduces drag in pipe lines. MFC systems significantly reduce corrosion & pitting, prevent and eliminate the formation of sludge & tank high bottoms and extend tank-cleaning intervals.

FAQ

1. WHAT IS A MAGNETIC FLUID CONDITIONER?

(a) The MFC unit is a series of very powerful magnetic circuits.
(b) Installation is in line with the piping so that all the fluid passes through the MFC.
(c) "State of the art" RARE EARTH permanent magnets.
(d) No external electrical power or recharging is needed.

2. WHAT DOES THE MFC DO?

a. It prohibits scale build-up in new pipes and equipment.
b. It progressively removes scale from existing pipes, boilers, water towers, heat exchanger units, production equipment,portable domestic hot water systems, etc.
c. Removal or elimination of scale deposits from the walls of the pipe or surfaces of equipment greatly reduces the incidence of "under deposit" pitting corrosion cells from forming. Also a system clean of scale deposits is much easier to keep free of bacteria, fungus and algae.

3. HOW DOES IT DO THIS?

The fluid to be treated is accelerated through controlled and intensified magnetic fields creating enormous molecular excitation that affects the size of particles of precipitated compounds.

4. HOW LONG IS THE CLEAN-UP PERIOD?

The clean-up period depends upon many variables. The type of scale or combination of materials, the temperature it has been exposed to as well as the velocity, turbulence and conductivity of the fluid are some of the variables.

5. WILL IT WORK ON ALL TYPES OF WATER?

The MFC is most effective in hard water, salt water and soft treated water.

6. WILL IT TREAT LARGE SYSTEMS?

There is no limit to the size that MFC's can be built.

7. IS THE MFC A WATER SOFTENER?

No. The MFC is not a water softener, it does change the state of the solids in the water. Scale control can then be cut back or eliminated. Just getting the scaling problems under control will make the MFC cost effective in severe cases as the above described boiler.

8. DO I STILL NEED CHEMICALS?

The MFC unit can eliminate the use of chemicals in some cases,but more likely it will greatly "reduce" the amount of chemistry and frequency it needs to be applied. Reduction of chemical additives for control of microbes is another benefit of installing an MFC in your system.